User Guide

Sonos ZonePlayer ZP80 Setup Guide
7
3. If you are setting up a new Sonos system, insert the Sonos System Setup CD-ROM
(included with your bundle) and follow the prompts to connect your ZonePlayer ZP80 and
set up access to your music files.
• Then plug your Sonos Controller into the power adapter, and follow the prompts on the
Controller’s screen to add it to your music system.
4. If you are adding this ZonePlayer to an existing Sonos system, choose one of the
following options:
• Use the Sonos Controller to add the ZonePlayer ZP80 to your music system by selecting
System Settings→Add a ZonePlayer from the Music menu. Or,
• Use the Desktop Controller software to add the ZonePlayer ZP80 to your music system by
selecting Zones→Set Up Zones→Add.
Now that your Sonos system is set up, you can connect the ZonePlayer ZP80 to an external
amplifier such as your home theater or your computer.
Note: Firewall software such as Norton Internet Security™, McAfee™ Personal Firewall,
Windows® Service Pack 2, or Mac OS X Firewall, can block the operation of your Sonos
Desktop Controller software. During installation, you may see prompts from your firewall
software indicating that the Sonos application is attempting to perform certain
operations. You should always allow full access to the Sonos application. You may
also need to change the settings of your firewall software to ensure that Windows file
sharing is not blocked. Please go to our Web site at http://faq.sonos.com/firewall for
detailed instructions.
During the setup process, you will be asked
to press and release the Mute and Volume Up
buttons simultaneously on the ZonePlayer
you are adding to your music system.
For use with:
• Windows XP, including Windows XP
Media Center
• Windows 2000
• Mac OS X, version 10.3 or higher
If your operating system is not one of these, go to
http://faq.sonos.com/nodcr for setup assistance.
Mute button
Volume Up button