Owner's Manual

Sonos PLAYBASE
19
• If you’re using a PC, select Manage -> Settings.
• If you’re using a Mac, select Sonos -> Preferences.
2. Choose a room (on a Mac or PC, select the room from the Room Settings drop-down list).
3. Tu r n off Speaker Touch Controls.
Change room names
If you’re using a mobile device
1. From the Settings menu, tap Room Settings.
2. Select the room you wish to change.
3. Ta p Room Name.
4. Select a new name from the list and tap OK, or choose Enter New to type a unique name.
If you’re using a computer
1. Select Manage -> Settings (PC) or Sonos -> Preferences (Mac).
2. Select Room Settings if it is not already highlighted on the left.
3. Choose the room you wish to change from the Room Settings drop-down list.
4. From the Basic tab, enter a new name or choose one from the Room Name list.
Basic troubleshooting
If a problem occurs, you can try the troubleshooting suggestions listed below. If one of these doesn’t remedy
the problem, or you are not sure how to proceed, please contact the Sonos Customer Support team and we’ll
be happy to help.
• Customer Support
• Visit our PLAYBASE reference section at http://moreinfo.sonos.com/PLAYBASE
• Visit our website at www.sonos.com/support
• Email us at [e-mail]
PLAYBASE not detected during setup
• Did you allow Sonos to check for updates? The Sonos PLAYBASE requires software version 7.2 or later.
• Is the power cord properly seated? Be sure to push the power cord firmly into the PLAYBASE until it is
flush with the surface.
• If either of these is not the problem, a network issue may be preventing the PLAYBASE from connecting
to your Sonos system. Try moving the Sonos products closer together.
Warning:Do not open the product as there is a risk of electric shock. Under no
circumstances should the product be repaired by anyone other than an authorized
Sonos repair center, as this will invalidate the warranty. Please contact Sonos
Customer Support for more information.