Owner's Manual

Product Guide
24
6. Insert and secure the wall anchors (supplied in the wall mount kit).
• If you are drilling into wood stud, do not use the wall anchors.
• If you are drilling into Sheetrock, screw the wall anchors into the drywall with a Phillips head screwdriver until the head
is flat against or slightly below the wall surface, being careful not to overtighten.
7. Fasten the PLAYBAR bracket to the wall using the screws supplied in the wall mount kit. Use the level to verify accuracy a
final time, and then tighten the screws securely.
Note: The anchors can be installed using a screw gun or a regular power drill with a Phillips
head screwdriver attachment. If you are drilling into sheetrock, the surface of the drywall
may distort slightly or dimple as the anchor is installed. This is not unusual.
Note: If using wall anchors, continue to drill for a few seconds even after it appears the
screw is secure— the anchor will likely spin a little as the anchor expands inside the wall.