User Manual
Table Of Contents
Product Guide
8
• Insert the stripped end of the speaker wire into the hole, and then release. The stripped portion should
be caught firmly in the connector post.
• Repeat to install the other speaker wires.
• If your speakers have banana connectors, you can insert the plugs directly into the banana jacks on the
back of the CONNECT:AMP instead.
2. Attach the power cord and plug into a wall outlet—make sure the Voltage Switch on the back of the
CONNECT:AMP is set to the proper position for your country before applying power.
After a few moments, the Status indicator will begin to flash green (if this Sonos product was previously
connected to another Sonos system, the Status indicator may be solid white instead.)
(For additional information, please see the CONNECT:AMP product guide:
Sonos CONNECT:AMP Product Guide.)
Note: Connect the red (+) and black (-) terminals from each speaker to the
corresponding terminals on the Sonos CONNECT:AMP. Mismatching of polarities
will result in weak central sound, and a distorted sense of sound direction.
When making connections, ensure that none of the strands of your speaker wire
come in contact with an adjoining terminal on the rear panel.