Operation Manual
English
25
Fault Possible cause Remedy
Poor AM recep-
tion quality
AM antenna is not con-
nected
Connect the AM antenna (refer to section
4.4 "Connecting the antenna").
The AM antenna is not cor-
rectly positioned
Change the position of the
AM antenna.
Alarm does not
work
Alarm is not switched on Switch the alarm on (refer to section
8.2 "Alarm").
Alarm volume is set to
minimum
Increase the volume (refer to section
8.2 "Alarm").
Headphones are connected Remove the headphones from the
socket.
11. Technical data
Display 8 digit VFD display
Internal battery supply 3 V lithium battery (IEC code: CR2032)
Power consumption during
stand-by operation
approx. 2 W
Dimensions approx. 210 x 130 x 120 mm
Weight without mains
adapter
approx. 1,600 g
AUX-IN
Max. input voltage 250 mV eff.
Input impedance 22 kOhm
MAINS ADAPTER
Model number VA24*-120200
Input 100-240 V~ AC, 0.7 A, 50-60 Hz
Output 12 V DC, 2.0 A
Dimensions approx. 81.5 x 49.5 x 48,5 mm
Weight approx. 200 g
* for different national versions (e.g. A for USA, B for Europe, C for UK, E for Australia).
Subject to technical modications!