User's Manual

Rev.1.01
2022. 03.
34 / 96
Doc # : BN-SM-EOP-01
probe must be protected from extreme operating temperatures
4.4 Troubleshooting
Inspection : Check whether connection between probe and host(smart phone or tablet)
is OK or not
Error handling:
#
Symptoms
Solutions
1
No response after pressing power
button
Check the status of charging and
power supply
2
Wi-Fi is NOT connected between the
probe and host (smart phone or
tablet)
Check whether Wi-Fi signal channel is
ready or not.
Check whether Wi-Fi password is
correct or not.
3
Displayed on the screen with noise
and interference like snow
Check whether other equipment
started which cause electromagnetic
interference. If so, shut down the
device or get far from the device.
4
The brightness of image is not
enough
Adjust the brightness and gain
5
Charging is NOT work
Check whether the USB interface,
circuit and electrical outlet are
damaged or not.
4.5 Disposal
Warning