User's Manual

Rev.1.01

2022. 03.

30 / 57

Doc # : BN-SF-EOP-01

4.2 Cleaning and Disinfecting Probes

All probes must be cleaned and disinfected before and after each use. Use a soft cloth

or appropriate cleaning sheet, lightly dampened with Isopropyl alcohol (or proper

cleaner), to remove any foreign substances left on the probe, the edges, corners, and

curved parts of the probes. Dry the probe with a clean, soft cloth. Alternatively, dampen

a soft cloth in a glutaraldehyde-based hospital disinfectant solution such as Cidex. Wipe

the probe with a dampened cloth.

If still wet or left a stain, wipe with a clean water-dampened cloth. Before use, dry the

probe completely with clean, soft cloth.

4.3 Storage

When not in use, it is recommended to put the probe in its case. During storage, the

probe must be protected from extreme operating temperatures

4.4 Troubleshooting

Inspection : Check whether connection between probe and host(smart phone or tablet)

is OK or not

Error handling:

Symptoms

Solutions

No response after pressing power

button

Check the status of charging and

power supply

Wi-Fi is NOT connected between the

probe and host (smart phone or

tablet)

Check whether Wi-Fi signal channel is

ready or not.

Check whether Wi-Fi password is

correct or not.