User's Manual

Rev.1.01
2022. 03.
23 / 57
Doc # : BN-SF-EOP-01
[Figure 3-9] Measure the LENGTH
◼ AREA/CIRCUMFERENCE
Choose “AREA/CIRCUM”. Using the Finger, Set to specify 3 points of the measurement
area and then you can see elliptical trajectory. When you click the one of 3 points, you
can adjust the size and location and the area and circumstance will be measured
automatically.
If the color of 3 points is green, you can move or change but if white, complete to
measure and cannot move or change.
◼ ANGLE
Choose “ANGLE”. Draw a straight line at first(Please refer to “LENGTH”). Specify 3
rd
point and then measure the angle formed by the points automatically. When you click
the one of 3 points, you can adjust the location and the area and circumstance will be
measured automatically.
If the color of 3 points is green, you can move or change but if white, complete to
measure and cannot move or change.
◼ TRACE
Measure the area of an irregularly shaped object. Choose “TRACE”. Set to specify the
starting point for tracing on the contour of the