User's Manual

Rev.1.01
2022. 03.
22 / 57
Doc # : BN-SF-EOP-01
3.4 Measurement
3.4.1 Basic Measurement
Press “Measure” button at Freeze in B mode, you can see 10 measurement items (When
scrolling, the rest of the measurements are also visible.) as Figure 3-8. The available
measurement methods vary depending on the current Operation mode and Application.
[Figure 3-8] Measurement
◼ LENGTH
Choose “LENGTH”. Use the Finger and Set to specify both end points of the
measurement area. Specify both end points and then the distance between them will
be measured automatically.
If the color of both end points is green, you can move or change but if white, complete
to measure and cannot move or change.