User's Manual

Rev.1.01
2022. 03.
13 / 57
Doc # : BN-SF-EOP-01
2.3 Using Probe
2.3.1 Visual Inspection
Check the probe for cracks, broken parts, liquid leaks, sharp edges, etc.
Warning
Using damaged probes may result in electric shocks and other hazards to the
patients and/or users. If damaged, stop using them immediately and contact to
Bionet’s Customer Service Department.
2.3.2 Cleaning Probe
All probes must be cleaned and disinfected after each use. Refer to “Chapter 4.2.
Cleaning and disinfection”.
Warning
Probes that have not been cleaned or disinfected may cause bacterial and viral
infections
2.3.3 Booting
Please check the following before scanning
1. The probe should not be abnormally heated during use. If the temperature of the
probe is much higher than body temperature, or the surface temperature of the
probe exceeds 40 °C, the probe is stopped
Warning
Do not use the probe which is heated abnormally to patient, as it may burn patient’s
skin
2. After turning on the power, check whether the functions of ultrasound image, app,
button, etc. are working properly.