Owner's Manual

• operation •

ALAAP I BANDISH • page 4 ALAAP I BANDISH • page 5

1. Your remote control unit comes with battery ﬁtted, but there is an insulating sticker

to prevent it from making connections and getting drained. Open the battery

compartment on the rear of the remote control by turning it anticlockwise, with a

coin. Remove the sticker, and put the battery cover back.

2. Insert the female end of the supplied mains cable to the unit and the male or plug

end to a 230V 50Hz 3 pin wall outlet.

3. Switch on the unit by operating the rocker type power switch on the rear. The standby

power indicator on top panel will glow red. This indicates that power has been

applied to the unit, but it is on stand-by.

4. Press power button on the remote control unit, or the power switch on the top panel.

The standby indicator will turn off and the corresponding indicator for the input last

selected will light up.

5. You have a choice of connecting 4 types of input as the source. Proceed as below, to

play music from different input sources

i. AUX - Connect your source to the AUX socket, at the rear, with a 3.5 mm stereo

phone jack. Press the AUX key on the top panel, or the AUX button on the remote, to

play. Change volume as required, with the Volume up/down buttons on remote or top

panel.

ii. BT – Connect your smartphone/tablet/laptop or other device with Voice Assistant/

Streamer connectivity by pairing with the Alaap or Bandish. For this, turn on Voice

Assistant/Streamer, under Settings, in your smartphone. Next press the BT button on

your remote or that on top panel. Search for Voice Assistant/Streamer devices in your

smartphone. You will see the name Alaap or Bandish displayed in your smartphone.

Pair with the same and play music from your smartphone. The procedure will be

similar for a tablet or PC.

You can pause a track or commence play from pause mode, by pressing the Play/

Pause button on remote or the respective keys on top panel or from source device. To

select previous or next track, press the respective buttons momentarily on top panel

or can be selected via source device or remote.

CD PLAYER/ DVD PLAYER

BT SOURCE

CHARGING

AUDIO

OUT

USB

AUDIO

• operation •