Manual

4.7 DescriptionofControls 4 THE OXFORD DENOISER
not cause a noticeable change in dominant noise content. DeNoising only the Side
channel means that mono operation is entirely unaffected while stereo operation
produces a cleaner stereo image without affecting the central sound. Secondly,
recordings made with the Mid-Side microphone technique often have more noticeable
noise in the Side signal because the Side signal is mainly ambiance. If the Mid-Side
recording is then converted to Left /Right at some point, the Mid-Side mode of the
DeNoiser allows you to de-noise just the Side content.
4.7 DescriptionofControls
4.7.1 InputandOutputPanels
The input and output meters indicate 1dB per
segment for the top 18dB of dynamics range,
and 2dB per segment thereafter.
Audition the cleaned audio signal.
Audition what is being removed
from the audio signal.
Can quickly add warmth into the
signal if desired.
With Master Enable selected, all processing is
active. If not selected, all repairs are disabled,
although all the detection circuits remain active.
www.sonnox.com 39 Gotocontents