Manual
Table Of Contents
- Introduction
- The Oxford DeClicker
- The Oxford DeBuzzer
- The Oxford DeNoiser
- Preset Manager Toolbar
- Supported Platforms
- System Requirements
- Copyright and Acknowledgements
3.4 SensitivityModesforOptimalBuzzRemoval 3 THE OXFORD DEBUZZER
3.4.2 TheAlternativeModeofBuzzRemoval
There is a second mode of Buzz removal that might be more appropriate under some
circumstances. The sequence above is using the default mode of repair. If AltMode is
selected, the characteristics of the sequence reverse, with the harmonics appearing in the
audio output first, and finally the fundamental. The following sequence of figures shows
the audio output with a reducing sensitivity, but this time with AltMode on.
Sensitivity at maximum:
Lowering Sensitivity with the higher harmonics appearing in the Audio output:
www.sonnox.com 23 Gotocontents