Manual

3.4 SensitivityModesforOptimalBuzzRemoval 3 THE OXFORD DEBUZZER
you reduce the sensitivity you are moving signal and buzz elements out of the Diff output
into the Audio output.
This diagram shows a fairly broadband buzz, with elements up to 10kHz or more:
The following sequence of figures shows the Audio output with the DeBuzzer in circuit but
with steadily decreasing sensitivity. Note at full sensitivity that all elements of the buzz are
removed (and note that the Range control is set to about 10kHz):
As we reduce the sensitivity the fundamental appears in the Audio output:
www.sonnox.com 21 Gotocontents