Manual

2.9 Specifications 2 THE OXFORD DECLICKER
2.9 Specifications
2.9.1 SampleRates
The supported samples rates are 44.1, 48, 88.2 and 96kHz only.
2.9.2 DelaysandCPU Usage
VST,AU andAAX Native
44.1 48kHz 88.2kHz 96kHz
Delay
3250 3328 6180 6336
Separately from the latency, the Restore plug-ins address CPU usage in various ways.
The user can take advantage of advances in CPU power of modern computers if
appropriate, but also use the plug- ins extensively with older and possibly lower-powered
computers. Remember that generally, even if the plug-in repair sections are not IN, the
detection circuits are still active and will be adding to the CPU load. Please also take note
of the following comments regarding CPU usage:
InternalBufferSizes
Additionally, all three Restore plug-ins use internal buffer sizes of 1024 for 44.1kHz and
48kHz operation and 2048 for 88.2kHz and 96kHz operation. We advise that the buffer
sizes of the sound card, and thus of the host application, are set to match these figures. If
the buffer sizes are not matched there will be an inefficiency in the data transfer, and in
some applications this leads to uneven CPU behaviour.
CPU Usage
The graphical area can be CPU-intensive if there are many detected events, for example if
the sensitivities are set very high and the thresholds are low. Additionally, the pop-up
displays can add CPU load and for that reason there is the option to turn off the
pop-ups.
www.sonnox.com 15 Gotocontents