Manual
Table Of Contents
- Introduction
- The Oxford DeClicker
- The Oxford DeBuzzer
- The Oxford DeNoiser
- Preset Manager Toolbar
- Supported Platforms
- System Requirements
- Copyright and Acknowledgements
2.6 DescriptionofControls 2 THE OXFORD DECLICKER
2.6.3 DialogueMode
VOICE THRESHOLD
This control determines the threshold at which detected events are allocated
between the two sets of Detect/Repair settings. Any event detected while the level
is above the threshold (coloured blue) will be allocated to the AboveSet; any event
detected while the level is below the threshold (coloured red) will be allocated to the
BelowSet.
ABOVE SET
With AboveSet selected, the Detect/Repair controls are used on events that are
above the VoiceThreshold.
BELOW SET
With BelowSet selected, the Detect/Repair controls are used on events that are
below the VoiceThreshold.
SIDE-CHAIN LF FILTER
Sets the LF limit for the side-chain.
SIDE-CHAIN HF FILTER
Sets the HF limit for the side-chain.
www.sonnox.com 12 Gotocontents