Manual
Table Of Contents
- Introduction
- The Oxford DeClicker
- The Oxford DeBuzzer
- The Oxford DeNoiser
- Preset Manager Toolbar
- Supported Platforms
- System Requirements
- Copyright and Acknowledgements
2.6 DescriptionofControls 2 THE OXFORD DECLICKER
Set the Threshold/Sensitivity controls of the Below controls, or drag the threshold lines
on the graphs to appropriate background settings.
Then click the AboveSet button, to switch the controls over to displaying the AboveSet
of controls. Set these Threshold/Sensitivity controls or drag the threshold lines on the
graphs to appropriate settings for the speech.
The final feature of the DialogueMode that makes it even more flexible is the
incorporation of a Side-Chain. This feature further defines when the signal level is Above
the VoiceThreshold and when it is Below. Without the side-chain, the Above/Below
splitting occurs purely on the level/amplitude of the signal. When you use the side-chain,
Above/Below splitting occurs on the level of the signal within a particular frequency
band.
2.6 DescriptionofControls
2.6.1 InputandOutputPanels
Meters
The input and output meters indicate 1dB per segment for the top 18dB of
dynamics range, and 2dB per segment thereafter.
Trim
The input trim has a range of +12dB to -12dB. The output trim has a range of 0.0dB
to -12dB.
LISTEN AUDIO
Selects auditioning of the cleaned audio signal.
LISTEN DIFF
Selects auditioning of what is being removed from the audio signal.
LISTEN SIDE-CHAIN
Selects auditioning of the side chain.
DIALOGUE GATE
Enables the Dialogue Mode and displays the Dialogue control panel.
MASTER ENABLE
With Master Enable selected, all processing is active. If not selected, all repairs are
disabled, although all the detection circuits remain active.
www.sonnox.com 10 Gotocontents