Manual
Table Of Contents
- Introduction
- Supported Codecs and Formats
- The Sonnox Fraunhofer Pro-Codec
- Additional Information on Workflows
- Lossless Codecs (mp3-HD and HD-AAC)
- Description of Controls
- Presets and Project/Session Data Handling
- Preset Manager Toolbar
- Pro-Codec Signal and Control Flow Diagram
- Specifications
- Copyright and Acknowledgements
- Manual Revision History
- Platform Specific Supplement
!
59
Bitstream Levels / Trim Tab
METERS (x5) — Indicate when a decoded signal is above 0dB.
Includes peak hold.
MAX dB (x5) — Indicates the maximum level detected by the
decoder. This value is yellow if negative, and red if positive. Clicking
in this window resets the peak hold value.
TRIM dB (x5) — Indicates the input trim to the individual codecs. This is a Touch Pad
control, allowing a fader style movement to determine an attenuation of up to a maximum of
12dB. If this value is non-zero, the Touch Pad background is pink. The TRIM dB controls
are automatable.
Comp(ression) Tab
BITRATE COMPRESSION (x5) – Shows an indication of the
amount of data compression in the output data stream or file. The
compression is expressed as a ratio, from 1:1 down to around 128:1.
A yellow asterisk denotes an estimated value.
A-B Auditioning Tab*
A (x5) — Selects the codec to be routed through ‘A’.
B (x5) — Selects the codec or input to be routed through ‘B’.
A-B — Glitchlessly switches output routing between active codecs
selected in ‘A’ or ‘B’.
HIDE — Cloaks the AB matrix state and FFT scope.
BOTH — Displays both ‘A’ and ‘B’ difference signals.