Manual
Table Of Contents
- Introduction
- Supported Codecs and Formats
- The Sonnox Fraunhofer Pro-Codec
- Additional Information on Workflows
- Lossless Codecs (mp3-HD and HD-AAC)
- Description of Controls
- Presets and Project/Session Data Handling
- Preset Manager Toolbar
- Pro-Codec Signal and Control Flow Diagram
- Specifications
- Copyright and Acknowledgements
- Manual Revision History
- Platform Specific Supplement
!
44
5.2.2 mp3-HD
mp3-HD 16-bit dither/truncation (correct dither/truncation)
The noise floor of the input signal is displayed as around -125dB (~30dB down from -96dB).
The diff signal is indicating -180dB (the 16-bit integer input is identical to the 16 bit integer
post-codec, with no ‘inters’). The bit meter shows no activity in bits greater than 16.
mp3-HD 20-bit dither/truncation
The noise floor of the input signal is displayed as around -150dB (~30dB down
from -120dB).
The diff signal is indicating -125dB with overtones at around -100dB (this is an error
condition because the 20-bit input contains information that the 16-bit output of the codec
cannot reproduce).
The bit meter shows incorrect dither activity in bits 17 to 20.
!