Manual
Table Of Contents
- Introduction
- Supported Codecs and Formats
- The Sonnox Fraunhofer Pro-Codec
- Additional Information on Workflows
- Lossless Codecs (mp3-HD and HD-AAC)
- Description of Controls
- Presets and Project/Session Data Handling
- Preset Manager Toolbar
- Pro-Codec Signal and Control Flow Diagram
- Specifications
- Copyright and Acknowledgements
- Manual Revision History
- Platform Specific Supplement
!
16
For convenient trimming, the value in the MAX dB window can be selected, dragged and
dropped onto the TRIM dB cell. The MAX dB value can be repeatedly dropped onto the
TRIM cell; each time the value is subtracted from the current TRIM value. In the screenshot
above, there is a 0.30dB overload from a signal already reduced by 0.90dB. Selecting and
dragging the value from MAX dB to TRIM dB will set the latter to -1.20dB.
This post-decode level overload monitoring is present even if the TRIM tab is deselected.
There are permanently visible overload indicators to the right of each of the five codec
selection windows. Clicking on an overload LED resets the overload condition for that codec.
NOTE: See section 4.4 Bitstream Level Monitoring for more details.
!