Manual

20
Master IN button
Applies the EQ function type selected as described above The I N button light will go out if
another EQ type is selected, indicating that the EQ remains unchanged until the I N button is
selected again.
Overload Indicator
This (just above the EQ Type window) displays any signal overload (red) at the output of the
EQ and Filter sections. This can be disabled via the Sonnox button menu (see below). When
active, the default mode for this function is latching, requiring a click to reset. The options
menu provides a mechanism to select the duration of the overload indicator.
Options Menu
Clicking the Sonnox button produces a drop-
down options menu (see right).
Over Light – Determines the approximate time
that the over light will stay on for when the plug-
in has detected a full-level sample at either its
input or output.
Enable Sonnox Toolbar – displays or hides the
Sonnox Preset Manager Toolbar.
Show Preset Name Path – Shows the
hierarchical directory path for Presets that are
stored in sub-folders of the default Preset folder.
Always Display Numeric Values – When this option is selected, the EQ and Filters’
numeric parameter displays are permanently shown. With this option de-selected, the
numeric displays are only shown for EQ and Filter sections that are IN.
Copy A to B and Copy B to A – These provide a quick mechanism to copy A and B EQ
settings between each other.