Manual

43
SOFT RATIO Selector — selects the soft ratio starting threshold in 5dB steps to –20dB
below threshold control setting.
RATIO — controls the ratio of the compressor and expander processes. It is inoperative in
limiter and gate functions.
THRESHOLD — controls the threshold of any dynamics function selected.
ATTACK — controls the attack time of any dynamics function selected.
HOLD — controls the hold time of any dynamics function selected.
RELEASE — controls the release time of any dynamics function selected.
MAKE-UP — applies gain make-up to a maximum of +24dBr only when the compressor is
operative. In the Gate and Expander functions the control is used for RANGE adjustment.
Gain Reduction Meters — separate metering displays (GATE, EXP, COMP, LIMIT) for
the relative gain reduction contributions of each section. The overall gain reduction at any
time is the larger of these contributions.
Options Menu — clicking the Sonnox button
produces a drop-down options menu (see right).
Clip Lights – determines the approximate time
that the overload indicator will stay on for when
the plug-in has detected a full-level sample at
either its input or output.
Enable Sonnox Toolbar – displays or hides the
Sonnox Preset Manager Toolbar.
Show Preset Name Path – shows the hierarchical directory path for Presets that are
stored in sub-folders of the default Preset folder.