Manual
Table Of Contents
- Introduction
- Operation
- ‘Front Panel’ Controls
- Dynamics Control
- Compressor
- Limiter
- Expander
- Gate
- Sidechain EQ
- Warmth
- Max Trim Control
- Dither Control
- Buss Compressor (Pro Tools TDM only)
- Description of Controls
- Preset Manager Toolbar
- Specifications
- Copyright and Acknowledgements
- Manual Revision History
- Platform Specific Supplement
32
2.7 Sidechain EQ
A high specification two-band Sidechain EQ (S-C EQ) is provided to allow de-essing and
other modifications of sidechain frequency response. The EQ processing section may be
routed to either the dynamics sidechain or the main signal path or both simultaneously, by
selection of the independent EQ-SC and EQ SIGNAL buttons.
2.7.1 Sidechain EQ Controls
All Gain, Frequency and Q controls operate separately, and their values are displayed
permanently. Values may also be entered directly by clicking on any desired display field.
LF GAIN — Controls LF section gains between -20dB and +20dB.
LF FREQ — Controls LF peak frequency between 20Hz and 1KHz.
LF Q — Controls LF Q from 0.5 to 16.