Product Manual

Section 2 – xMac Studio Description
Rackmount Rails
You may remove and reposition the pair of included rackmount rails.
When installed on the upper mounting pins, the rails support enclosure
installation in racks with mounting depths ranging from 16–20.25 inches.
When installed on lower mounting pins, the rails support enclosure
installation in racks with mounting depths ranging from 19.75–24 inches.
Power Cord
Included only with xMac Studio with an Echo Module, connect this
between a power outlet and the power input socket on the Echo Module.
Note that the power cord included with your product may appear
different than the one pictured here, depending on where the product was
purchased.
Thunderbolt 3 (40Gbps) Cable
Included only with xMac Studio with an Echo Module, connect this cable
between a Thunderbolt port on the module and a Thunderbolt/USB4 port
on your computer.
Thunderbolt 3 Connector Retainer Clip
Included only with xMac Studio with an Echo Module, this clip
secures the Thunderbolt 3 connector plugged into one of the module’s
Thunderbolt ports to prevent accidental cable disconnection. This clip is
compatible with Sonnet 0.5- and 0.7-meter Thunderbolt 3 cables.
Self-adhesive Magnet (not shown)
The magnet may be cut to size and affixed to Thunderbolt or USB SSDs or
other devices (except for spinning drives) installed in the accessory space
to secure them in place; instructions follow.
6