Product Manual

Section 2 – xMac Studio Description
3
1 – Threaded Nut(s) for ThunderLok 3
Attach the included Thunderbolt connector retainer
clip here.
2 – Thunderbolt Ports
Connect the included (or comparable) Thunderbolt 3
(40Gbps) cable, or any Thunderbolt 4 cable, between
one of these ports and one of your computer’s
Thunderbolt ports.
The Echo III Module’s second Thunderbolt port may
be used to connect to another Thunderbolt peripheral
device, display(s), or USB device (when connected with
the proper cable or adapter).
3 – Power Input Socket
Connect the included AC power cord here.
4 – Accessory Space Cover Plate
Remove this plate to insert your Thunderbolt
™
or
USB SSD (or other compact device) up to 3.2-inches
(81 mm) wide by 0.75-inch (19.5 mm) tall, and then
reinstall the plate to secure the device. Depending on
its size, you may install more than one device
Back Panel — xMac Studio / Echo III
Back Panel — xMac Studio / Echo I
Support Notes: The xMac Studio / No Module
system is not shown here.
The Echo III Module includes two Thunderbolt ports and
two threaded nuts for the included Thunderbolt connector
retainer clip; the Echo I Module only has one each.