Product Manual

1. Using the six thumbscrews you removed previously, secure the front
panel to the enclosure; do not overtighten the screws (Figure 16).
2. Adjust or remove the rackmount extension rails on the rackmount
enclosure as necessary (Figure 17).
3. Install the assembled xMac Studio into its rack or case.
4. Connect interface and power cables between devices, PCIe cards, and
the computer as necessary.
5. Connect the power cord included with the Echo Module between a
wall outlet or power strip and the module’s power socket. Note that
the Echo Module’s power indicator will not light until the computer is
powered on.
Section 8 – Final Assembly and Enclosure Installation Steps
15
Figure 17
Upper Mounting Pins
Lower Mounting Pins
Figure 16
Support Note: If you haven’t set up your Mac Studio, you will need
to connect a monitor, keyboard, and mouse to complete those steps.