Manual

Chapter 2 – xMac mini Server T3E Description
Offset Screwdriver
Use this tool to remove the screw securing the port access
cover for slot 1, and to install the screw securing the PCIe
card you install into it.
Daughter Card Mounting Bracket
This bracket supports the installation of a daughter card
that is in turn connected to the card installed into PCIe
slot 1.
Auxiliary Power Cable
This cable passes power between the xMac’s auxiliary
power connector and the PCIe power connector found on
some PCIe cards.
Thunderbolt 3 (40Gbps) Cable
Connect this cable between the xMac mini Server’s
Thunderbolt 3 port and your computer (or other
Thunderbolt device in the chain connected to the
computer).
ThunderLok 3 Thunderbolt Connector Retainer Clip
This secures a Thunderbolt 3 connector plugged into
the xMac mini Server’s Thunderbolt 3 port to prevent
accidental cable disconnection. This clip is compatible with
the included Sonnet 0.5-meter Thunderbolt 3 cable and
Sonnet 0.7-meter Thunderbolt 3 cables, but not with Sonnet
1- or 2-meter Thunderbolt 3 cables.
4