Manual

Appendix
A – Daughter Card Installation Steps
1. Insert the included daughter card mounting bracket into the xMac
mini Server as shown, using the provided screws to secure the bracket
through the bottom of the chassis (Figure A1).
2. Remove the screw from the top of the bracket and set it aside
(Figure A1).
3. Remove the daughter card from its packaging, handling the card by
its edges and without touching any components.
4. Turn the daughter card components (or connectors) face up, and then
insert the bottom tip of the PCIe bracket into the slot near the power
supply, with the top of the PCIe bracket wrapped around the daughter
card bracket as shown (Figure A2).
5. Secure the card to the daughter card bracket using the screw included
with it (Figure A2).
6. If you are installing BNC cables in the xMacs BNC connector
mounting holes, go to the next page. Otherwise, return to step 14 on
page 7, and complete the setup procedure.
Figure A1
Figure A2
A