Product Manual

Computer Installation Steps
4. Route the USB cables attached to the front plate through the enclosure
as shown (Figure 3).
5. Using the six thumbscrews you removed previously, secure the front
panel to the enclosure; do not overtighten the screws (Figure 3).
6. Connect the front panel USB cables to the computers (Figure 4).
7. If you are planning to place SSDs or other devices in one or both
accessory spaces beneath each computer, skip to the next page.
8. If you haven’t already installed the RackMac Studio into its rack or
case, do so now.
9. Connect interface and power cables between devices and computers
as necessary; your installation is complete.
4
Figure 3
Figure 4