Product Manual

RackMac Studio Description

1 – USB-A Port

This connects to the installed Mac Studio to the right

of the port through a cable attached to the front panel

2 – Power Switch

This button activates the Mac Studio’s rear-mounted

power switch.

3 – Accessory Space Cover Plate

Remove this plate to insert your Thunderbolt

™

USB SSDs (or other compact devices) up to 3.2-inches

(81 mm) wide by 0.75-inch (19.5 mm) tall, and then

reinstall the plate to secure the devices.

Self-adhesive Magnets (not shown)

Magnets may be cut to size and afﬁxed to Thunderbolt

or USB SSDs or other devices (except for spinning drives)

installed in the accessory spaces to secure them in place;

instructions follow.