Product Manual

7
Wall Mounting Installation Steps
Figure 11
Figure 12
5. Insert the included drywall anchors
into the holes you drilled into the wall
as necessary (Figure 11).
6. Using a hammer, tap the anchors into
the wall until their heads are flush with
the wall.
7. Remove the MacCuff Studio bracket from its packaging.
8. Using a #1 Phillips screwdriver, remove the screw securing the
locking bar to the bracket, remove the bar, and then set aside
the screw, bar, and screwdriver (Figure 12).
Or
Support Note: For the best
holding capability, insert the
drywall anchors into the wall so that their
“teeth” are oriented vertically.