Product Manual

5
Under-Desk/Under-Shelf Installation Steps
13. Secure the bar to the bracket with the Phillips screw you
removed previously, or, for better security, secure the bar
using the included T8 Torx screw using the included Torx
screwdriver bit (Figure 7). Do not overtighten the screw.
14. For additional security, install a padlock through the
round hole on locking bar (Figure 8). Alternately, you may
secure the locking bar with a Kensington lock installed in
the Kensington slot on the front of the bar, or with both a
padlock and Kensington lock.
Figure 7
Figure 8
Kensington lock slot