Product Manual

2
What You Will Need to Install MacCuff Studio
For Under-Desk or Under-Shelf Installation
To install the MacCuff Studio to the bottom of a desk or shelf, you
should have the following items ready (all sold separately).
Safety Glasses
Painter’s or Masking Tape
Hammer
Center Hole Punch
Corded or Battery-Powered Electric Drill
Drill Bit (See Instructions for Recommended Size Details)
#1 Phillips Screwdriver
For Wall Mounting
To install the MacCuff Studio on a wall, you should have the
following items ready (all sold separately).
Safety Glasses
Painter’s or Masking Tape
Stud Finder
Level
Hammer
Center Hole Punch (Optional)
Corded or Battery-Powered Electric Drill
3/32 -inch (2.5 mm) and 5/16-inch (8 mm) Drill Bits
#1 Phillips Screwdriver