Product Manual

Package Contents
In addition to the MacCuff Studio mounting
bracket and locking bar (not shown), the
following items are included in your package.
Some items shown here may appear different from
the ones included in your package.
1 – 1-1/2 inch Wood Screws
Use these along with the drywall anchors to
secure the MacCuff Studio bracket to a wall.
Unless screwing into a stud, never use these
without drywall anchors.
2 – Drywall Anchors
Use these as necessary when installing the
bracket to a wall.
3 – 3/4-inch Wood Screws
Use these screws to secure the bracket to a
desk or shelf.
4 – Phillips Head Screw
As shipped, this screw is pre-installed and
holding the locking bar in place during shipping.
Use this screw to secure the locking bar to
the bracket to provide basic security.
5 – T8 Torx Screw
Use this screw in place of the included
Phillips head screw to secure the locking bar
to the bracket to provide improved security.
6 – Magnetic Phillips Screwdriver Bit
Use this bit with a power drill or screwdriver
(not included) to drive provided wood
screws in to secure the bracket to a wall,
desk, or shelf.
7 – T8 Torx Screwdriver Bit
Use this bit with a magnetic-tip screwdriver
(not included) with the included Torx screw
to secure the locking bar to the bracket.
8 – Cable Management Clips
Use these to help organize cables connected
to your Mac Studio.
1