Owner's manual

v
Appendix A - CLI ASCII-Based Interface
Command Default Example
RGResumeRebuild rgresumerebuild groupname1
RGSectorSize 512 setrgsectorsize groupname1 8192
RGSpanDepth 1 set rgspandepth groupname1 22
RGSpeedRead auto set rgspeedread groupname1 enabled
RGUnmap rgunmap groupname1
RMStatus rmstatus groupname1
Route route fc 1 0 raid alpha1 6
RouteDisplay routedisplay fc
SASPortList
SASTargets sastargets
SaveConfiguration saveconfiguration
SerialNumber get serialnumber
SerialPortBaudRate 115200 set serialportbaudrate 19200
SerialPortEcho enabled get serialportecho
SES enabled set ses disabled
SESAlarmTest sessalarmtest 22 set
SESDiskFailureAlarm disabled set sesdiskfailurealarm enabled
SESEnclosures sesenclosures
SESIdentify off set sesidentify all
SESIdentifyStop sesidentifystop all
SESMute
SESPoll 30 set sespoll 0
SESStartingSlot 1 set sesstartingslot 2
SESStatus sesstatus
SNTP enabled get sntp
SNTPServer 192.43.244.18 set sntpserver 129.6.15.28
TailEventLog taileventlog
Temperature get temperature
Time set time 03:32:30
TimeZone EST set timezone pst
UserName root set username Binky
VerboseMode enabled set verbosemode disabled
VirtualDriveInfo virtualdriveinfo
WrapEventLog enabled set wrapeventlog disabled
zModem zmodem receive