Owner's manual

24
Identifying a Drive
You may want to physically identify a drive in the RX1600Fibre
or attached RX1600 Expansion systems. This method will work
even if SES is unavailable.
1. Follow the instructions in Preliminary Steps on page 23.
2. Click Identify Drive. The Identify SES Elements page
appears. See Figure 23 on page 26.
3. Click the box representing the drive you wish to identify.
Alternatively, you may click Identify All to select all the
drives.
4. Click Commit. The drive activity LED(s) for the drive(s) in
the Fusion drive enclosure illuminates for one minute.
5. To stop the operation, deselect the drive(s).
1.6 Drive Diagnostics
WARNING: Executing this command adversely impacts
performance and throughput for the time that the LED
is illuminated. The preferred method to identify SES elements as
described in Identifying SES Elements on page 27.