Owner's manual

4
1.1 Ensure Drive Integrity
After Creating RAID Groups
1. If you’re not already in the Sonnet Web Management Tool,
type the IP address of your RX1600Fibre in a standard
browser. On the splash screen, click Enter Here. In the box
provided, type in your user name and password, and then
click OK.
2. Click the Diagnostics button on the left side of the window.
3. Choose Initialize and Verify Drives to test newly added
drives that are not part of a RAID group. Choose Read-Only
Drive Test to nondestructively test any drives.
4. Click Next.
5. If no drives appear, click System Scan in the Drives box.
If drives are available, click the drives you wish to verify,
initialize or test; the drives are highlighted. See Figure 4 on
page 5.
6. Click Commit.
7. A warning box appears. In the warning box, verify that you
want to complete the configuration by clicking Yes. Clicking
No ends the procedure without making a change.
8. The Drive Performance and Health page appears showing
what tests are running and their results. You may select
other tests to run or continue on to other tasks. See Figure 5
on page 6.
WARNING: Do not restart the RX1600Fibre or disconnect
or power cycle drives during Drive Initialization and
Verification or you must start the verification process from the
beginning.