Configuration Tool and Utilities Operation Manual Instruction Manual

19
S.M.A.R.T. Notifications
When S.M.A.R.T. monitoring is enabled, status is collected from
each SATA drive at 60 minute intervals. If the data is different
than the previous status, a S.M.A.R.T. status record is added to the
S.M.A.R.T. status file for that drive. A notification of the S.M.A.R.T.
status difference is generated based upon the current settings
in the Notifications pane. Refer to RAID Event Notifications on
page 25.
The S.M.A.R.T. status’ notification level is determined as follows:
• INFO: None of the status values was below the threshold value.
• WARNING: One or more of the status values was below a
threshold value but none was classified as critical.
• CRITICAL: One or more of the status values was below a
threshold value and one was classified critical.
1.3 Drive and RAID Group Monitoring