FUSION R400Q ™ 4-Bay Serial ATA Rackmount Drive Enclosure with Quad Interface User’s Guide For Windows
Fusion R400Q Specifications and Features Drive Presence LED (Bay 1) Power LED Drive Presence LED (Bay 2) Drive Presence LED (Bay 3) Drive Presence LED (Bay 4) Drive Tray Drive Tray Drive Tray Drive Tray (Bay 1) (Bay 2) (Bay 3) (Bay 4) Power switch Drive Activity LED (Bay 1) Drive Activity LED (Bay 3) Drive Activity LED (Bay 2) Drive Activity LED (Bay 4) Figure 1 Power Cable Connector Figure 2 FireWire 800 Connector FireWire® 400 Connector Mini-USB Connector FireWire 800 Connector eSATA
Safety Precautions and Disclaimers SAFETY PRECAUTIONS DISCLAIMERS (continued) Please read this section carefully before proceeding. These precautions explain the correct and safe use of this device, thereby helping to prevent injury to you or others, and also help you to minimize the risk of damaging the device. Drive Usage: Sonnet Technologies has qualified the hard drives listed below for use in Fusion R400Q storage systems.
Drive Installation and Enclosure Setup 1. Remove the Fusion R400Q from its packaging, and place it on a flat, level surface. 2. If you intend to place the Fusion enclosure on a desktop or other flat surface, attach the included adhesive-backed feet to the bottom of the enclosure (Figure 3). foot 3. If you intend to use the Fusion enclosure in a rack, install the Sonnet rack slide set (or equivalent), sold separately: • FUS-RSS-P for 17–21.5" deep racks • FUS-RSS-S for 23–26.
Drive Installation and Enclosure Setup WARNING: When securing the trays to the hard drives, you must verify the screw heads are flush with the tray. Otherwise, a screw may catch on the tray below and prevent you from removing the tray from the enclosure. screw drive tray screw 7. Using four of the supplied screws, secure the drive tray to the drive; tighten each screw to secure the tray snugly to the drive; do not overtighten the screws (Figure 7). screw screw Figure 7 8.
Drive Installation and Enclosure Setup Connect Fusion R400Q to FireWire or USB Port This section describes the connection of the Fusion R400Q to your computer’s FireWire or USB ports. If you intend connect the R400Q to your computer’s SATA host controller card, go back to the previous section. Note: Your Fusion R400Q’s port layout may be different than what is pictured in this guide eSATA jumper cable 1.
Tips and Additional Information Tips Contacting Sonnet Customer Service This section covers some common sense tips for using the Fusion R400Q enclosure. USA Customers The Sonnet Web site located at www.sonnettech.com has the most current support information and technical updates. Before you call Sonnet Customer Service, please check our Web site for the latest updates and online support files, and check this User’s Guide for helpful information.
©2010 Sonnet Technologies, Inc. All rights reserved. Sonnet, the Sonnet logotype, Simply Fast, the Simply Fast logotype, Creativity Stored Here, and Fusion are trademarks of Sonnet Technologies, Inc. FireWire, Macintosh, Mac, the Mac logo, and Mac OS are trademarks of Apple Inc., registered in the United States and other countries. Other product names are trademarks of their respective owners. Product specifications subject to change without notice. Printed in the USA.
