FUSION DX800RAID ™ 8-Drive Serial ATA Disk Array Storage System Drive Enclosure User’s Guide For Windows
Fusion DX800RAID Enclosure Specs and Features Enclosure Specifications Compatibility Drive Module (Bay 1) computers with Sonnet RAID controller installed Drive Module (Bay 2) Drive Module (Bay 3) Drive Module (Bay 4) Drive Activity (Blue) and Identification/Fault (Red) Indicator LEDs Drive Module (Bay 5) Enclosure Link LED Drive Module (Bay 6) SCSI Enclosure Services LED Drive Module (Bay 7) 2 x mini-SAS Drives Supported 3 & 1.5 Gb/s Serial ATA; 3.
Safety Precautions and Disclaimers SAFETY PRECAUTIONS Drive Usage (continued) 500GB Models • Hitachi Ultrastar A7K1000, # HUA721050KLA330 • Seagate Barracuda ES, # ST3500630NS • Seagate Barracuda ES.2, # ST3500320NS(1) • Seagate Constellation ES, # ST3500514NS Please read this section carefully before proceeding. These precautions explain the correct and safe use of this device, thereby helping to prevent injury to you or others, and also help you to minimize the risk of damaging the device.
Enclosure Setup Prepare Fusion DX800RAID Drive Enclosure for Use 1. Remove the Fusion drive enclosure from its packaging, and place it near the computer to which it will be connected. WARNING: When handling computer products, take care to prevent components from being damaged by static electricity; avoid working in carpeted areas. Handle hard drives only by their edges and avoid touching connector traces and component pins. Pull lever out until it stops 2.
Enclosure Setup How to Connect Additional Fusion DX800RAID Drive Enclosures This section explains how to connect additional Fusion DX800RAID enclosures to your system. Perform all steps listed here with your computer and Fusion storage systems powered off. 1.
Tips and Additional Information Tips This section covers some common sense tips for using the Fusion DX800RAID enclosure. Connecting Fusion DX800RAID enclosures to a Sonnet RAID controller other than the one with which it shipped: Fusion DX800RAID enclosures are matched with their included Sonnet RAID controller. When you connect a Fusion DX800RAID enclosure to a different card, you may have to force them to pair up if the card has not been updated with the latest firmware. 1.
