FUSION D800RAID ™ 8-Bay Serial ATA Disk Array Storage System Drive Enclosure User’s Guide For Windows
Fusion D800RAID Enclosure Specs and Features Specifications Compatibility Compatible with Mac®, Windows®, and Linux® computers with compatible Drive Tray (Bay 1) host adapter installed Drive Tray (Bay 2) Interface Connectors 2 x Infiniband multilane Drives Supported 3 & 1.5 Gb/s Serial ATA; 7,200 RPM Power Supply 100–240V AC, 50/60Hz Operating Temperature 32 to 95˚ F (0˚ C to 35˚ C) Dimensions (WxDxH) 5.9 x 17.9 x 12.
Safety Precautions and Disclaimers SAFETY PRECAUTIONS Drive Usage (continued) 500GB Models • Hitachi Deskstar E7K500, # HDS725050KLA360 • Hitachi Deskstar E7K1000, # HDE721050SLA330 • Hitachi Ultrastar A7K1000, # HUA721050KLA330 • Seagate Barracuda ES, # ST3500630NS • Seagate Barracuda ES.2, # ST3500320NS(1) • Western Digital RE3 Enterprise, # WD5002ABYS Please read this section carefully before proceeding.
Drive Installation and Enclosure Setup 1. Remove the Fusion D800RAID and its drive trays from their packaging, and place them near the computer to which the enclosure will be connected. 2. Take one of the drive trays and push its lever release button in until the lever pops out (Figure 3). push in lever release button WARNING: When handling computer products, take care to prevent components from being damaged by static electricity; avoid working in carpeted areas.
Drive Installation and Enclosure Setup WARNING: When inserting drive modules into the enclosure, do not force the levers closed. If a lever does not close easily, remove and reinsert the module, and then push the lever in again. 6. Carefully slide the drive module into the enclosure until its lever starts to close, and then push the lever in until it clicks to secure the drive module inside the enclosure (Figure 7). push lever until it clicks 7. Repeat steps 2-6 for additional drives.
Tips and Additional Information Tips This section covers some common sense tips for using the Fusion D800RAID enclosure. Connecting Fusion D800RAID enclosures to a Sonnet RAID controller other than the one with which it shipped: Fusion D800RAID enclosures are matched with their included Sonnet RAID controller. When you connect a Fusion D800RAID enclosure to a different card, you may have to force them to pair up if the card has not been updated with the latest firmware. 1.
