FUSION D400Q ™ 4-Drive Serial ATA Disk Enclosure with Quad Interface User’s Guide For Windows
Fusion D400Q Specifications and Features Enclosure Specifications Drive Module (Bay 1) Drive Presence LED (Bay 1) Drive Activity LED (Bay 1) Drive Module (Bay 2) Drive Presence LED (Bay 2) Drive Activity LED (Bay 2) Drive Module (Bay 3) Drive Presence LED (Bay 3) Drive Activity LED (Bay 3) Drive Module (Bay 4) Drive Presence LED (Bay 4) Figure 1 FireWire 800 Connector FireWire 400 Connector Compatible with Mac®, Windows®, and Linux® computers with compatible interface Interface Connectors eSATA,
Safety Precautions and Disclaimers SAFETY PRECAUTIONS DISCLAIMERS Please read this section carefully before proceeding. These precautions explain the correct and safe use of this device, thereby helping to prevent injury to you or others, and also help you to minimize the risk of damaging the device. Drive Usage: Sonnet Technologies has qualified the hard drives listed below for use in Fusion D400Q storage systems.
Drive Installation and Enclosure Setup 1. Remove the Fusion disk enclosure and drive modules from their packaging, and place them near the computer to which the enclosure will be connected. WARNING: When handling computer products, take care to prevent components from being damaged by static electricity; avoid working in carpeted areas. Handle hard drives only by their edges and avoid touching connector traces and component pins. push in lever release button 2.
Drive Installation and Enclosure Setup Connect Fusion D400Q to a FireWire or USB Port This section describes the connection of the Fusion D400Q to your computer’s FireWire or USB ports. Note: Your Fusion D400Q’s port layout may be different than what is pictured in this guide 1. Connect the supplied 6" eSATA cable between the SATA out and SATA in connectors on the back of the enclosure (Figure 6). eSATA jumper cable Figure 6 2.
Tips and Additional Information This section covers some tips for using the Fusion D400Q. Changing Drive Formats: The drives included with Fusion D400Q are Mac OS Extendedformatted, and configured as a single RAID Level 0 set. If you need to change the configuration, use the operating system software tools to reformat and reconfigure the drives. For Mac users, use Disk Utility; for Windows users, use Disk Management.
