FUSION 400 ™ 4-Bay Serial ATA Hot-Swap Drive Enclosure User’s Guide For Windows
Fusion 400 Specifications and Features Specifications Compatibility Compatible with Mac, Windows, and Linux computers with compatible SATA controller External Connectors Four eSATA Drives Supported 1.
Introduction and Safety Precautions Introduction SAFETY PRECAUTIONS Sonnet’s Fusion 400 4-bay Serial ATA (SATA) drive enclosure combines the versatility of hot-swap functionality with support for the fastest 3.5" SATA drives in a compact package. This enclosure supports 3Gb/s drives and is backward compatible with 1.5Gb/s drives, so you’ll get maximum flexibility in choosing drives for years to come. Please read this section carefully before proceeding.
Drive Installation and Enclosure Setup 1. Remove the Fusion 400 from its packaging, and place the enclosure near the computer to which it will be connected. 2. Remove a drive tray from the enclosure by pulling on its lever, and then sliding it out. Lay it on a flat, level surface (Figure 3). drive tray WARNING: When handling computer products, take care to prevent components from being damaged by static electricity; avoid working in carpeted areas.
Tips and Additional Information Tips Limited Warranty This section covers some common sense tips for using the Fusion 400 enclosure. Sonnet Technologies, Inc. warrants that this product shall be free from defects in materials and workmanship for a period of three years following the date of original purchase. For complete warranty information, go to www.sonnettech.com.
Remember to register your product online at http://registration.sonnettech.com to be informed of future upgrades and product releases. Software updates and links are available from the Sonnet web site at www.sonnettech.com. • Online support form available at http://supportform.sonnettech.com. Sonnet Technologies Customer Service hours are Mon.-Fri., 7 a.m.–5 p.m. Pacific Time • Customer Service Phone: 1-949-472-2772 • E-mail: support@sonnettech.com Sonnet Technologies, Inc.
