Installation & Assembly

2 of 2

Assembly Instructions

Important

• Always disconnect the power before installing or replacing bulbs and before cleaning or other maintenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualié pour vous assurer que les conducteurs de la dérivation sont adéquats.

1. Shut off power to the outlet box (A).

2. Make appropriate electrical connections using wire nuts:

a. Connect the transformer's (B) live wire (black) to the live outlet box wire.

b. Connect the transformer's (B) neutral wire (white) to the neutral outlet box wire.

c. Connect the fixture's ground wire (green or uncoated) to the ground outlet box wire. If no ground is present in outlet box, connect

fixture's ground wire to the mounting plate (C) using the green screw (included).

d. Carefully place connections and transformer (B) in outlet box (A).

3. Attach the mounting plate (C) to the outlet box (A), secure with outlet box screws (D).

4. Install the back plate (E) to the mounting plate (C) by hooking the bend (F) onto the bracket in the back plate. Secure with set screws (G)

using included Allen wrench (H).

5. Restore power to the fixture.

Note

• This fixture is dimmable with Electronic Low Voltage (Trailing-Edge) type dimmers only.

Care Instructions

• Dusting: Use a clean, dry cloth.

• Cleaning: To protect the finish, avoid any harsh abrasives or chemicals.

INSTRUCTIONS D’INSTALLATION

18" LED Bath Bar, 24" LED Bath Bar, 32" LED Bath Bar, 40" LED Bath Bar