Installation Sheet

June 10, 2019
©2019 SONNEMAN - A WAY OF LIGHT
2 of 26
Power Bars
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Tri-Bar Power Bar Assembly:
1. Insert one of the Arms onto the Center Hub, and
secure with the four Phillips Screws (Fig. 1).
2. Repeat for the other Arm (Fig. 2).
Linear Power Bar Assembly:
1. The Linear Power Bar comes with a spacer clip pre-installed at the center of the Power
Bar (Fig. 2).
2. If desired, the Spacer Clip can be removed using a Phillips Screwdriver (Fig. 4).
3. Power Bar must be supported at least every 4 feet.
Fig. 1
Fig. 3
Fig. 4
Fig. 2
1XC02XX12x 1XC02XX24x
Applies to Components:
Applies to Components:
1XC01XX12x
1XC01XX24x
1XC01XX36x
1XC01XX48x
1XC01XX72x
1XC01XX96x
Arm
Power Bar
Spacer Clip
Phillips Screwdriver
Center
Hub
Phillips
Screws