Installation Sheet

June 10, 2019

26 of 26

Suspenders

- Ceiling Mount Configuration

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Important

• Always disconnect the power before installing or replacing components and before cleaning or other main-

tenance.

• Consult a qualied, licensed electrician to ensure correct branch circuit conductor.

Consulter un électricien qualiﬁé pour vous assurer que les conducteurs de la dérivation sont adéquats.

Note

• This fixture is dimmable with Electronic Low Voltage (i.e., Trailing-Edge/Reverse Phase) type dimmers ONLY.

Power Bar

Oset

Bracket

Standard

Bracket

Power Feed

Luminaire

Hanger

Luminaire

Flush Rotational

Power Bar Hanger

1. Shut o power to the outlet box.

2. Assemble the Power Feed as shown on page 25.

3. Connect the Power Bar to the ceiling using the Power Feed and Standard Brackets.

4. For 2-Bar congurations only: Connect the second Power Bar to the ceiling using the Oset Brackets as shown on page 8,

and to the rst Power Bar using the Flush Rotational Power Bar Hanger as shown on page 8.

5. Connect the Luminaires and Luminaire Hangers (if applicable) to the Power Bars as shown on pages 13-21.

6. Restore power to the outlet box.