Installation Sheet

June 10, 2019

23 of 26

Suspenders Precise

Trim Kits

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Applies to Components:

1XZ03010xx

1XZ03020xx

1XZ03030xx

Power Precise Square Trims:

1. Align Trim with Light Engine, make sure to align the Notch found on the Trim to the Set Screw found on the Light Engine

(Fig. 1).

2. Insert the Trim into the Light Engine (Fig. 2).

3. Secure the Trim by screwing in the Set Screws (Fig. 3).

Fig. 1

Fig. 2

Fig. 3

Set Screw

Light Engine

Notch

Applies to Components:

1XZ04000xx

Precise Cell Luminaire Trims:

1. Align Trim Subassembly with Light Engine. Note: Beam Angle Mark is visible on the Trim Subassembly (Fig. 1).

2. Snap Trim Subassembly into Light Engine, press up rmly on the bottom of the Trim Subassembly, while pressing down

on the top of the Light Engine, until the Trim Subassembly clicks into place (Fig. 2). Note: Use the Notch on the enclosure to

help detach the trim.

Fig. 1

Fig. 2

Trim Subassembly

Beam

Angle Mark

Notch

Light Engine

Beam

Angle Mark

Beam

Angle

D10 10°

D24 24°

10X35 10°X35°

D48 48°