Installation Sheet

June 10, 2019
©2019 SONNEMAN - A WAY OF LIGHT
21 of 26
Luminaires and Luminaire Hangers
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
Mezzaluna Luminaire:
1. Align Luminaire with Power Bar
(Fig.1), press down rmly on the top
of the Luminaire, while pressing up on the bottom of the
Power Bar, until the Power Bar clicks into place (Fig. 2).
2. Mezzaluna Luminaires can be assembled on top or
on the bottom of the Power Bar. Two Luminaires can
be assembled in the same location of the Power Bar on
opposite sides (Fig. 3).
Fig. 1
Fig. 3
Fig. 2
1XDXXCH06x
Applies to Components:
Mezzaluna
Luminaire
Power Bar
Precise Direct Mount:
1. Align Luminaire with
Power Bar (Fig. 1),
press up rmly on the
bottom of the Luminaire, while pressing down on the top
of the Power Bar, until the Power Bar clicks into place (Fig.
2).
Note: Precise Direct Mount Luminaires can be assembled
on top or on the bottom of the Power Bar.
Fig. 2
Power Bar
Luminaire
CLICK!
Connecting a Suspenders Precise Bar-Mounted Hub for Duplex Light Engines to a Power
Bar:
1. Place the Hub over the Power Bar then press down rmly on top of Hub, while pressing up
on the bottom of the Power Bar, until the Hub clicks into place (Fig. 1).
2. Attach the Hub Cover to the Hub, making sure the counter-sunk holes on the cover are
facing inward. Secure using two small Thumb Screws (Fig. 2).
3. Install the Cylinder Light Engine to the Hub by inserting the contacts on the Hub into the slots on the Light Engine (Fig. 3),
then twisting the Light Engine to the ends of the slots (Fig. 4). Note: Flip Hub Cover to change to single direction (Fig. 5).
Fig. 5
Fig. 4
Fig. 3
Fig. 2
Fig. 1
Thumb
Screws
Hub Cover
Hub
Cylinder
Light
Engine
Cylinder
Light
Engine
Power
Bar
1XB04CH00x
1XB04CH01x
1XDXXCH01x
1XDXXCH03x
1XDXXCH04x
1XDXXCH07x
Applies to Components:
Fig. 1
Applies to Components:
1XDXXCH01x-X
1XDXXCH04x-X
1XDXXCH05x-X