Installation Sheet

June 10, 2019

20 of 26

Luminaires and Luminaire Hangers

Assembly Instructions

INSTRUCTIONS D’INSTALLATION

Precise Blade Mount Hanger and Precise Bar-Mounted Aimable Light Engine:

1. Align Hanger with Power Bar (Fig. 1) and press down rmly on the top of the Power Bar,

while pressing up on the bottom of the Plug, until the Power Bar clicks into place (Fig. 2).

2. Align Light Engine with Blade Mount Hanger (Fig. 1), connect Light Engine to Blade Mount Hanger (Fig. 2).

3. Secure Light Engine to Blade Mount Hanger by screwing on Retention Ring (Fig. 3).

1XDXXRH01x

1XDXXRH02x

1XDXXRH03x

1XDXXRH04x

1XDXXRH05x

1XDXXRH06x

1XB04RH00x

1XB04RH01x

Applies to Components:

Fig. 1

Fig. 2

Fig. 3

Power Bar

Light Engine

Blade Mount

Hanger

Retention

Ring

Applies to Precise

Wall Blade Mount

Hanger

Connecting an HCxx Luminaire to a Cluster Luminaire Hanger (Fig. 2):

1. Insert the two Rods of the Cluster Luminaire Hanger and the bottom Luminaire into the Center

Hub.

2. Use the included Allen Key to tighten the four Set Screws.

Center Hub

Rod

Set Screw

1XDXXHCxxx

1XB04HRxxx

Applies to Components:

Fig. 2

Allen Key