Installation Sheet

June 10, 2019
©2019 SONNEMAN - A WAY OF LIGHT
19 of 26
Single Rod Luminaire Hanger:
1. Make sure Spring Contacts of each Hanger face opposite
directions (Fig. 3).
2. Align Hanger with Power Bar (Fig. 4) and press down rmly on
the top of the Power Bar, while pressing up on the bottom of the
Hanger, until the Power Bar clicks into place. (Fig. 5)
Connecting Linear Rotational Luminaire to
Single Rod Luminaire Hanger:
1. Align Linear Rotational Luminaire with both
Hangers (Fig. 1).
2. Insert Luminare onto Hangers and secure with
Set Screws (Fig. 2). Note: Luminaire can rotate
360° (Fig. 2).
Luminaires and Luminaire Hangers
Assembly Instructions
INSTRUCTIONS D’INSTALLATION
1XB04SRxxx
1XDXXSR01x-xx
Applies to Components:
Fig. 4
Fig. 5
Fig. 3
Fig. 1
Fig. 2
Hanger
Luminaire
Set Screw
Hanger
Spring
Contact
Power Bar
Single Rod Luminaire Hanger:
1. Make sure Spring Contact of each Hanger
opposes each other (Fig. 3).
2. Align Hanger with Power Bar (Fig. 4) and
press up rmly on the bottom of the Power Bar, while pressing
down on the top of the Hanger, until the Power Bar clicks into
place (Fig. 5).
1XB04SR16x-RG
1XDXXSR01x-xx
Applies to Components:
Connecting Linear Rotational Luminaire to Single
Rod Outrigger Luminaire Hanger:
1. Align Linear Rotational Luminaire with both
Hangers (Fig. 1).
2. Insert Luminare onto Hangers and secure with Set
Screws (Fig. 2). Note: Luminaire can rotate 360° (Fig.
2).(Fig. 2).
Fig. 3
Fig. 1
Fig. 2
Fig. 4
Fig. 5
Hanger
Hanger
Set Screw
Luminaire
Spring
Contact
Power Bar